INAYAULAGAM TO WELCOME

என்னுடைய பதிவை படிக்க வந்தமைக்கு நன்றி& WELCOME TO MY WEBSITE வாழ்க்கையில் திசை தெரியமால் போய் கொண்டு இருக்கும் ஏழை மாணவன் நான்

Sunday 24 January 2016

How to Fix Bad Sector of Harddisk

How to Fix Bad Sector of Harddisk

How to Fix Bad Sector of Harddisk

or

How To Fix Bad Sector on My External Harddisk

or

MY External Harddisk is Corrupted How to Fix it and Recover all Data


**We Are Not Responsible Caused by it So Try it At Own Risk**
** Read All Method Before Performing any Operation on Your Harddisk**


Windows Prompt for Format

Q/A:
==============================================
Why My Harddisk got this Error "Data Cyclic Redundancy error" ???
or
Why my harddisk gets Corrupted ??

  • Due to Improper use or Excess of Hard disk causes this Error.
  • Due to Improper Removal (Ejecting) of Hard disk. 
  • Due to Problem in USB ports and Cable.
  • Due to Forced Stop of Harddisk while Using it
  • Due to Fragmented Data its result to show above error

==============================================
What Care Should i take to Avoid such error ?
  • Proper use of Hard disk stop this Error.
  • Always Remove Harddisk or Removable Device as " Safe Remove"  .
  • Try to Update the Computer Drivers to Avoid Cable and USB issue.
  • Never " Forced Stop " Your Harddisk while Using it.
  • Use Always Disk Cleanup , Check Error Utilities and Disk Defragmentation utility.  
=============================================

How To Fix Data Cyclic Redundancy error ??
How to Fix Bad Sector ??

Note: 
  • Its Risky so try it on own risk OR Better send your harddisk to Your Pc Technician.. 
  • We Didn't say that all Data are Recoverable but we also didn't say that data is not Recoverable 
  • Your Damaged Partition are displayed as RAW and
  • Windows ask - "Do you want to format this drive"
Try to convert it to NTFS first if it fails then try Methods

  • - > Win + R
  • - > CMD
  • - > type below command in it
  • You can try convert i: /fs:ntfs 
  • where i is my drive which is Raw Formatted now its converting into NTFS from RAW without loosing data if its Working Then try this Below Steps

  • You Can Follow our Guide to Fix it
  • or Try Easeus RAW recovery too click here

Here we Go:

Method 1 : Using DOS Or CHKDSK Command
  • Chkdsk is Check Disk utility which is inbuilt in Microsoft Windows
  • You can Fix Bad Sector or Disk Error using it
  • You Can also use it as 
  • Goto > Harddisk partition > Right Click > Properties > Tools >Check Now
Through Run
  • U can use it in Run (Win + R) 
  • Type:
  • CHKDSK / f / r
  • Where
    / f = Fix error
    / r = Fix bad Sector
  • Eg: Chkdsk i: /r   = check disk is correcting error on my External Hdd  " I  " partition

==================================================================
Through CMD

  • Now Press Win Logo Key
  • Type CMD
  • Run As Administrator
  • Now You Are in " C:\> ---"
  • Now Type cd..
  • Again cd..  Now You r at " C:\>
  • Now Type ur Damaged Partition Letter Like H:  
  • (if u Get Data cyclic Error Then Try Method 2 And 3)
  • H:
  • Now you are at on H:\> 
  • Type  " CHKDSK /F "  or " Chkdsk /r " or both at same time " Chkdsk /f /r "
  • Its Done

===============================================

Method 2 : Using Disk Management along with Recovery Software


** Note **

  • I am Not Responsible for Any Data Loss its depends on How much your HDD is Damaged.
  • Its Risky so try it on own risk OR Better send your harddisk to Your Pc Technician.. 
  • Your Damaged Partition is RAW format So We Need to Format it first then Try to Recover it
  • Recovery Software like Power Data RecoveryEaseus Partition Recovery  
**I am Using Power Data Recovery to perform recovery Result it recover all stuff from my Damaged Partition RAW**

Step 1: 

**Perform only When you have RAW formatted partitioned otherwise skip to Step 2**

  • Your Damaged Partition is now RAW formatted Which is not accessible
  • So we need to format it now.
  • Now Goto Desktop -> Right Click on Computer -> Manage -> Disk Management or
  • Simply Run  " Diskmgmt.msc "
  • Now Right Click on  " Damaged Partition "
  • Now Click on " Delete Volume "  (Because That HDD partition is not formatable so we have to delete it and then create new volume to recover it *Risky stuff*)
  • Click on Yes After that You will See Unallocated Space
  • -> Now Right Click on it  - > Create New Volume - > Choose NTFS format
Step 2 :

Now all Basic things perform
  • Now Install Any Recovery software i recommends you to Download or Buy Power Data Recovery as its Support RAW Recovery.
  • Now Open POWER DATA RECOVERY 6.0 or Later.
  • Choose DAMAGED Partition Recovery Choose Your New Volume or Existing volume which is " not accessible " 
  • Its Start to Recover
  • Now its done
  • *Download Full Version Of Power Data Recovery Click here Credit Goes to A Dennis*


=====================================================================
Method 3 : Using HDD Regenerator pro along with Recovery Software
Step 1 : 
  • HDD Regenerator software is used to Recover or Fixed Bad Sector of Harddisk
  • it Works 100%
  • Makes your harddisk to works again sometimes deleting volume is not directly works          -> Due to some Bad Sectors so that's why we need to fix all Bad sector in our HDD first.
  • Download HDD Regenerator
  • Install it and Run it
  • Click on Click here to repair physical Bad Sector...
  • Now Choose Your Damaged Harddisk  now click on Start Process
  • Wait 20-30 Seconds Now if it Prompts
  • - > Choose Option 2 Normal Scan (With /Without Repair) Now Hit Enter
  • - > Choose Option 1 Scan And Repair  Now Hit Enter
  • -> Its Start to Detect & Repair 
  • *Be Patient it takes 5-8 Hours to completed depending upon the Hard disk capacity*
HDD  Regenerator
Step 2 : 
  • After it Fixed its Bad sector Next Part is same as above method 2: so Use it 
Step I
  • Simply Run  " Diskmgmt.msc "
  • Now Right Click on  " Damaged Partition "
  • Now Click on " Delete Volume "  (Because That HDD partition is not formatable so we have to delete it and then create new volume to recover it *Risky stuff*)
  • Click on Yes After that You will See Unallocated Space
  • -> Now Right Click on it  - > Create New Volume - > Choose NTFS format
Step II :
Now all Basic things perform
  • Now Install Any Recovery software i recommends you to Download or Buy Power Data Recovery as its Support RAW Recovery.
  • Now Open POWER DATA RECOVERY 6.0 or Later.
  • Choose DAMAGED Partition Recovery Choose Your New Volume or Existing volume which is " not accessible " 
  • Its Start to Recover
  • Now its done

============================================

Download Softwares:



Note:

  • Data is Fragmented fast on your Harddisk its Necessary to Use Weekly ChkDSK Command and Disk Defragment Utilities from Microsoft.
  • For Sharing Our any Tricks or Post Contact us Directly via Comments
  • Feel Free To Contact with us
  • Thanks for Visiting

Popular post